Skip to main content
Free tool

NYC Local Law 97 fine calculator

Enter your building type, size, and a year of energy use from your utility bills. You will see your estimated carbon emissions, your limit under Local Law 97, and what the fine could be for 2024-2029 and for the stricter 2030-2034 period.

1. Your building

NYC uses ENERGY STAR Portfolio Manager property types.

sq ft

For this use only, if the building is mixed-use.

2. Energy use for one year

Add up 12 months of bills. Leave a fuel blank if you do not use it.

kWh
therms
gallons
gallons
Mlb

Con Edison steam bills usually show Mlb (thousands of pounds).

2024-2029

Enter your numbers
Estimated yearly penalty
$0
Your emissions
0.0 tCO2e
Your limit
0.0 tCO2e
Over by
0.0 tCO2e

2030-2034

Enter your numbers
Estimated yearly penalty
$0
Your emissions
0.0 tCO2e
Your limit
0.0 tCO2e
Over by
0.0 tCO2e
Where your 2024-2029 emissions come from
  • Electricity0.0 tCO2e
  • Natural gas0.0 tCO2e
  • #2 fuel oil0.0 tCO2e
  • #4 fuel oil0.0 tCO2e
  • District steam0.0 tCO2e
This is an estimate, not legal or compliance advice. It uses the emissions rates and limits published by NYC in Local Law 97 and the Department of Buildings rule (1 RCNY 103-14), and the maximum penalty of $268per ton over the limit. Mixed-use buildings need each use calculated separately: run this tool once for each property type with its own floor area, then add the limits together. Your official numbers come from the yearly report filed by a registered design professional, which may include deductions, credits, or adjustments not shown here. The 2030-2034 estimate uses NYC's lower electricity and steam rates for that period and assumes your energy use stays the same.

Skip the spreadsheet next year

Conduit pulls this from your actual utility bills automatically, for every building in your portfolio, and keeps your LL97 exposure up to date as new bills arrive.

Book a Demo →

How the Local Law 97 fine works

Local Law 97 puts a yearly carbon cap on most NYC buildings over 25,000 square feet. Your cap depends on what the building is used for and how big it is: NYC sets a limit per square foot for each property type, and you multiply it by your floor area.

Your emissions come from the energy on your utility bills. NYC assigns each fuel a fixed carbon rate. For 2024-2029, every kWh of electricity counts as 0.000288962 metric tons of CO2e, and every therm of natural gas counts as about 0.0053 tons. Oil and steam have their own rates. Add them up and you get your yearly emissions.

If your emissions are higher than your cap, the penalty can be up to $268 for every ton over, every year. The caps get much tighter in 2030, so a building that is fine today can owe a large fine later unless it cuts energy use or switches fuels.

For the full rules, deadlines, and reporting steps, see our Local Law 97 compliance guide and how to get your utility data ready for LL97.

Frequently asked questions

How is the Local Law 97 fine calculated?

NYC adds up your building's yearly carbon emissions from each fuel (electricity, gas, oil, steam) using fixed conversion rates set in the law. It then compares that total to your building's limit, which is a set amount per square foot for your property type. For every metric ton of CO2e over the limit, the penalty can be up to $268 per year.

Which buildings does Local Law 97 cover?

Generally, any building over 25,000 gross square feet. It also covers two or more buildings on the same tax lot that together exceed 50,000 gross square feet, and two or more condo buildings governed by the same board that together exceed 50,000 gross square feet. Some buildings, such as certain rent-regulated and affordable housing, follow different compliance paths and timelines.

Why are my 2030 numbers so much worse?

The limits per square foot get much stricter starting in 2030. NYC also lowers the emissions rate it assigns to grid electricity and steam for 2030 to 2034, because the grid is expected to get cleaner. Buildings that burn gas or oil usually see the biggest jump in exposure, while all-electric buildings benefit most from the cleaner grid.

My building has more than one use. How do I calculate it?

Each use gets its own limit. For example, a building with apartments above ground-floor stores has a multifamily limit for the apartment floor area and a retail limit for the store floor area. You add those limits together to get the building's total limit. This calculator handles one property type at a time, so run each use separately and add the limits, or talk to us and we will do it from your bills.

Is this calculator's result my actual fine?

No. It is a planning estimate based on the numbers you enter. Your official result comes from the annual report a registered design professional files with the NYC Department of Buildings, which can include deductions, credits, and adjustments this tool does not cover.

Where do I find the energy numbers to enter?

From your utility bills. Add up 12 months of electricity (kWh), natural gas (therms), fuel oil deliveries (gallons), and district steam (usually shown in Mlb on Con Edison steam bills). Conduit collects these bills automatically and keeps the yearly totals up to date for you.